|
•4 fixing points fit at the sides of rear and front 19” mounting angles
•Component Shelves for 19” (482.6mm) mounting angles
•Slotted or unslotted
•Load capacity: 50kg. - (1 & 2) 100kg.
•Supplied with fixings, easy to install
•Material:Sheet steel
•4 fixing point fit the sides of main frames for wider shelf area. (2)
•Colour: Ral7035 or Ral7037
|
|
Component Shelf, 19” (482.6mm) , 1U and 2U
•19” Rack Mount, only one pair of 19” mounting angles is available for mounting.
•Slotted
•Load capacity:25kg.
•Easy to install
•Material:Sheet steel
•Colour: Ral7035 or Ral7037
|
|
•4 fixing points fit at the sides of rear and front 19” mounting angles
•Withdrawal Component Shelves for 19” (482.6mm) mounting angles
•Slotted or unslotted
• Load capacity: 25kg. - (1) 80kg.
•Supplied with fixings, easy to install
•Material:Sheet steel
•Colour: Ral7035 or Ral7037
|
|
Slide rails are designed to support heavy 19” devices by mounting to the 19” mounting angles at the sides.
• Supplied with fixings, easy to install
• Material:Sheet steel, zinc plated.
|
|
Lockable storage for, notebook, files, CD, disket, programming documents, etc…..
•19” 3U, Rack Mountable
•Sliding and lockable
•Material: Sheet steel
•Colour: Ral7035 or Ral7037
|
|
(1) 1U , Lockable drawer for keyboards up to 410mm. wide
•19” Rack Mountable
•Sliding and lockable
•Material: Sheet steel
•Colour: Ral7035 or Ral7037
2) 2U , Lockable drawer for keyboards up to 460mm. wide, turnable keyboard plate, pull out mouse pad, easy cable access
•19” Rack Mountable
•Sliding and lockable
•Material: Sheet steel
•Colour: Ral7035 or Ral7037
|
|
9U, 19” Monitor Holder up to 17” monitors
•Lockable
•19” Rack Mountable
•Material: Sheet steel
•Colour: Ral7035 or Ral7037
|
|
Aids in cooling of equipment.
•A fan provide 3.2m3/min. air circulation,
•CFM:80
•Noise:47dbm. (lower level noise is optional),
•CE certified.
•Complete with power cords and on/off switch
•Material: Sheet steel
•Colour: Ral7035 or Ral7037
Thermostat - air temperature controller
•Range:0-35 C
•Below set point, fans does not activated.
•Above set point fan units start ventilation.
|
|
Miniature circuit breaker protection
•Easy to install
•19”
•Complete with power cord
•CE certified
•Schuko, grounded type (for different types, please define)
|
|
M6 caged nut, m6x15 screw, m6 cup washer (1set=20pcs)
|
|
Earthing leads and Potential equalization busbar for earth continuity system
|
|
Lighting fixture with ON/OFF switch or automatic door switch.
•CE certified
•220VAC
|
|
•Large volume vertical cable management and trunking system for large cable bundles
•Closing cover system to hide and protect cable bundles.
•Easy to manage cable bundles and smart cable access holes
•Reduce labour costs
•From top to bottom, continuous with the height of cabinet
•Material:Sheet steel
•Colour:Ral7035 or Ral7037
|
|
•Vertical installation at side of rear of the cabinet
•Punched regularly as cable tray to tie cable bundles vertically
•Material:Sheet steel, zinc plated.
|
|
Blind plates to cover unused positions in the cabinets.
•Material: Sheet steel.
•Colour: Ral7035 or Ral9005
•19”
|
|
Floor fixing kits is used to fix the cabinet on floor. Another benefit is to protect the cabinet against to tilt.
•Material: Sheet steel.
•Colour: Ral7035 or Ral9005
|
|
•4The plinth is designed to heigher the cabinet 100mm from the floor. Inside is used as cable management and storage of bundles. It is designed with removable covers on 4 sides. It is in 3 different type defined as below.
•Material: Sheet steel.
•Colour: Ral7035 or Ral9005
|
|
•It is used baying of cabinets, the vertical uprights can be connected to each other by using baying kit.
•Material: Sheet steel.
•Colour: Ral7035 or Ral9005
|
|
3U 19” Distribution panel c/w neutral and grounding busbar, automatic fuses holder profile rail, cable support rail, cable fixings. It is used for 48vdc and 220vac distribution panel inside of the cabinets.
•Material: Sheet steel.
•Colour: Ral7035
|
|
4 3U 19” Telephone distribution panel c/w base for 150 pair LSA+telecom connector.
•Material: Sheet steel.
•Colour: Ral7035
|
|
The advantage of Estap cabinets is that, there is a rear panel in 3U that can be positioned on top or bottom. 3 different type panel gives you functionality to easy your use. Unless noted otherwise, it is delivered with brushed cable access
•Material: Sheet steel.
•Colour: Ral7035 or Ral9005
|
|
•The cabinet 10” is designed for SOHO applications and its standard accessories as below.
•Material: Sheet steel.
•Colour: Ral7035 or Ral9005
|
